Matchless Switched Live Wiring Diagram

In this diagram 2 wire cable runs between sw1 and the outlet.

Switched live wiring diagram. Switched live is only live when the switch is on this is where it gets its name from. This is commonly used to turn a table lamp on and off when entering a room. Installing the switched fan.

The source neutral is spliced in the switch box with the white. Note the switched live has a brown sleeve on it this highlights that the wire is actually a live wire even though it is blue this ensure that it is not confused with a neutral. Before undertaking any electrical project it is imperative that you know precisely what it is you re doing and to keep in mind that electricity can kill.

Diagram showing wiring method for an independently switched extractor fan. The source is at sw1 and the hot wire is connected to one of the terminals there. A standard 2 wire lighting circuit is shown in figure 1.

The brown wire is live also know as permanent live this brings the live supply to the switch. The blue wire is known as the switched live and takes power to the light. The lamp is wired so that the neutral black wire is connected to the neutral terminal and the live red wire is connected to the switched live terminal.

Here a receptacle outlet is controlled with a single pole switch. The other switch terminal is connected to the black cable wire running to the hot terminal on the receptacle. The diagram shows the power entering into the circuit at the switch box location then sending one power line for the outlet which is hot all the time and a switched leg for the top half of the outlet being used for a table lamp or a floor fixture.

For detailed step by step instructions on completing this home project. With that said this electrical tutorial presents a guide to identifying the switched live wire on a lighting circuit and also explains how to rewire a ceiling rose. The switched live would be placed in the no terminal whilst a jumper cable should go between the right hand.