Unique Nest Thermostat Fitting Instructions

3 8 in gently tug each wire to check they re secure and make sure.

Nest thermostat fitting instructions. Set up your thermostat 3. Press on the ring to open the quick view menu. Install the nest stand attach the thermostat base to the stand according to the instructions that came with it.

Nest thermostats don t have a touch screen. Use a pencil to mark the two screw holes. Connect the power cable to the base and plug it into a wall socket.

Refer to this article if you need extra help. Before you open. Get started using the nest thermostat.

To get an entry key go to your nest thermostat and push on the unit to bring up the home screen. Turn the ring to scroll through the different options and press the ring to choose one. Scan the code on the bottom of your thermostat stand to get started.

Choose nest thermostat from the list. If you have an r rc or rh wire you can put it into the r connector on the nest thermostat. Stand mounted thermostats should be placed on a table or shelf 0 75 1 m above the floor and no further than 1 m from the edge.

1 install the heat link first 2 remove or configure the programmer 3 attach the nest thermostat to the wall 4 plug the thermostat in with the power plug and cord installing the nest thermostat in a new spot if you re installing the nest thermostat and aren t connecting it to any cables within the wall then you ll need to. To connect your nest thermostat to the app on your phone you ll need to enter in an entry key. If you have a w2 y2 or o b wire you can put it into the o b connector if needed.