Beautiful Control Two Lights With One Switch

Control all the lights in the house from one switch or remote because most people unknowingly leave lights on as they leave the house we recommend installing the controller next to your front door.

Control two lights with one switch. The most common is to daisy chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The power supply connects to the first light. With this arrangement two lamps can be plugged into the same outlet and each can be controlled separately from two different locations.

More than one light this entry was posted in indoor wiring diagrams and tagged diagram do it yourself handyman handywoman home improvement home renovations home wiring house wiring light light switch power switch wiring wiring diagram. Green to ground the white wire on the timer to the neutral white wires splice that will be in the box and the black wire on the timer to the hot conductor one of the two on the existing switch then the timer red wire to the black wire on the existing switch that is connected to the lights. Duane 8 years ago.

Connect the white wire from the power supply to the white wire. The source hot wire is spliced with a pigtail to sw1 and to the. In this circuit a split receptacle is controlled by two separate switches.

How to wire two lights on one switch step 1. The source is at sw1 and 3 wire cable runs from there to the outlet 2 wire cable runs from there to sw2. You can do this light switch wiring in one of two ways.

Install the wall plate. Lighting circuits multiple lights from one switch how to add one or more additional lights so that all are operated from the same switch. Install the wall plate.

Here again the connecting tab between the receptacle terminals is broken off and the neutral tab remains intact. Go to the service panel and turn off power to the circuit you will be working on. Adding an extra cable to the existing ceiling rose to add a second light which is switched with the first one the switched line neutral and earth need to be extended to the second light.